These adapters (CCIN: 2CC3 FC: EN0U and EN0V) use 10 Gb copper twinax Ethernet cables listed in Table 3. However, if an OM2 cable is connected to an OM3 or OM4 cable, the OM2 cable characteristics apply to the entire length of the cables.Ĭables: PCIe2 4-Port (10Gb+1GBE) Copper SFP+RJ45 Adapters ** For best results, OM2 cables must not be connected to OM3 or OM4 cables. * Because core sizes differ, OM1 cables can be connected only to other OM1 cables. Supported distances for multimode fiber optic cablesĠ.5 meters to 33 meters (1.64 feet to 108.26 feet)Ġ.5 meters to 82 meters (1.64 feet to 269.02 feet)Ġ.5 meters to 300 meters (1.64 feet to 984.25 feet) These adapters (CCIN: 2CC3 FC: EN0S and EN0T) use multimode fiber optic cables with shortwave lasers.
Low-profile tailstock part number: 00E2721.Regular-height tailstock part number: 00E2862.Adapter FRU number: 00E2714 (complies with RoHS requirement).PCIe2 2-port 10 GbE BaseT RJ45 Adapters (CCIN: 2CC4 FC: EN0W EN0X) specifications: 10N7405 (1 Gb unshielded twisted pair (UTP) wrap plug).Low-profile tailstock part number: 00E2720.Adapter field-replaceable unit (FRU) number: 00E2715 (complies with RoHS requirement).PCIe2 4-Port (10Gb+1GbE) SR+RJ45 Adapters and PCIe2 4-port (10Gb+1GbE) Copper SFP+RJ45 Adapters specifications (CCIN: 2CC3 FC: EN0S, EN0T, EN0U, and EN0V): PCIe2 LP 4-port (10Gb+1GbE) Copper SFP+RJ45 Adapter PCIe2 4-port (10Gb+1GbE) Copper SFP+RJ45 Adapter PCIe2 LP 4-Port (10Gb+1GbE) SR+RJ45 Adapter PCIe2 LP 2-port 10 GbE BaseT RJ45 Adapter
Ordering part numbers, CCINs, and feature codes Table 1 contains the part numbers and feature codes for ordering these adapters. PCIe2 4-Port (10GbE SFP+ & 1GbE RJ45) Adapter The four-port adapter provides support for 10Gb SFP+ SR fiber or SFP+CU active Copper cable connectivity and 1Gb RJ45 CAT 5/5e cable connectivity.įigure 2 shows the PCIe2 4-Port (10GbE SFP+ & 1GbE RJ45) Adapter.įigure 2. The adapters provide support for 10Gb networking with CAT 6 copper cable connectivity with the two built-in RJ45 ports. These network adapters offer an ideal solution for IBM Power System servers that require high-speed data transfer in LAN connectivity for mission-critical applications using existing, affordable cabling and switching IT infrastructure. They are compatible with the installed base of GbE switching and cabling infrastructure commonly deployed today.įigure 1. The 4-port adapter enables affordable 10-Gigabit Ethernet (10GbE) network performance over SFP+ Multimode Fiber SR optical modules and also supports SFP+ Active Copper cables, depending on the Ethernet switch used. The 2-port adapters enable affordable 10-Gigabit Ethernet (10GbE) network performance with cost-effective RJ45 connections for distances up to 100 meters. These are PCI Express Generation 2 (PCIe2) x8, short form-factor, low-profile capable, regular height network interface card (NIC) adapters.
This IBM® Redbooks® Product Guide describes the PCIe2 2-Port 10GbE Base-T Adapter and PCIe2 4-Port (10GbE SFP+ & 1GbE RJ45) Adapter products.